- new device -
Very inexpensive high-temperature furnace up to 1550°C for zirconium.
Controller with touch operation P550 (10 programs with 20 segments each).
1.5 liter chamber volume for max. 45 units.
The high resistance of the SiC rods during periodic operation in harmony with the high heating rate make these ovens all-rounders in laboratory use. Heating times of approx. 40 minutes to 1500 °C can be achieved, depending on the oven model and operating conditions.
- Tmax 1550°C
- Minutes to Tmax 40
- High-quality fiber material, tailored to the operating temperature
- Housing made of structural stainless steel sheets
- Double-walled housing for low outside temperatures and high stability
- Optionally with a folding door (HTC), which can be used as a shelf, or with a lifting door (HTCT) at no extra charge, with the hot side facing away from the operator
- Adjustable supply air opening in the oven door, exhaust air opening in the rear wall
- Switchgear with solid-state relays, performance-matched to the SiC rods
- Easy replacement of the heating elements
- Cooling phase from 1500 °C to 250 °C in approx. 2.5 hours.
Additional equipment:
- Temperature selector limiter with adjustable switch-off temperature for thermal protection class 2 according to EN 60519-2 as overtemperature protection for the oven and the goods
- Square batch containers can be stacked for loading on up to three levels
- Spacer recommended under the lower batch container for good temperature uniformity
Technical data:
- Exterior W34.0 x D30.0 x H 46.0 cm + 195 mm; inside W110 x D120 x H120 mm
- Volume 1.5 l
- Mains voltage 220-240 V, 50/60 Hz
- Power max. 3500 W
- Temperature 1500 °C in approx. 40 min
- max. 40 crowns
- Weight approx. 18.0 kg
Delivery includes starter set for charging the zirconium sintered material consisting of:
Sinter bowl 110 x 75 x 30 mm with lid and spacer
